4A-G Engine Rebuild List
Here is some idea about how much is to rebuild a 4ag 16v, engine rebuild pricing base on a 4A-GE/ 7 Ribs Block. Beside Valves & Valve Guides, every single parts are Toyota Factory parts. Injector set is re-seal and re-calibrate with your stock injectors. Labor does not included for installation on the car.
list below is from 2006, All price subjected to change.
| Qty. | Parts | Price | Amount | |||||
| 4 | Rod Bearing | $ 10.50 | $ 42.00 | |||||
| 1 | Engine Gasket Set | $ 165.00 | $ 165.00 | |||||
| 5 | Main Bearing Set | $ 25.00 | $ 125.00 | |||||
| 1 | Piston Set w/ Ring | $ 265.00 | $ 265.00 | |||||
| 8 | Intake Valve | $ 6.50 | $ 52.00 | |||||
| 8 | Exhaust Valve | $ 7.50 | $ 60.00 | |||||
| 1 | Timing Belt | $ 30.00 | $ 30.00 | |||||
| 1 | Trust Bearing | $ 20.00 | $ 20.00 | |||||
| 1 | New Water Pump | $ 130.00 | $ 130.00 | |||||
| 1 | New Oil Pump | $ 108.00 | $ 108.00 | |||||
| 16 | Valve Guide | $ 8.00 | $ 128.00 | |||||
| 1 | TRD Head Gasket | $ 75.00 | $ 75.00 | |||||
| 1 | Injector Set | $ 130.00 | $ 130.00 | |||||
| 1 | Toda Valve Spring Set | $ 120.00 | $ 120.00 | |||||
| 1 | Tensioner | $ 40.00 | $ 40.00 | |||||
| Parts Total Amount | $ 1,490.00 | |||||||
| Labor | hours | Amount | ||||||
| Rebuild 4AG engine | 10 | $ 500.00 | ||||||
| Machine Shop Charge | Amount | |||||||
| Re-Surface Cylinder Head and 3 Angle Valve Job | $ 400.00 | |||||||
| Oversize Block, Hone & re-surface | $ 320.00 | |||||||
| Replace Valve Guide | $ 100.00 | |||||||
| Custom Wrist Pin Bushing | $ 150.00 | |||||||
| Labor Total | $ 1,470.00 | |||||||
| Sale Tax | $ 122.93 | |||||||
| Total | $ 3,082.93 | |||||||
Here are some pictures after the engine was done for one of our existing customer.
***If you have any question, please call Maxwell at 626-961-6284/ 310-869-8083
and Simon at 626-961-7711/ 909-839-3778
or
Email to: maxarancon@passracing.com/ sym@passracing.com